CAPRONI泵，CAPRONI閥，CAPRONI馬達，CAPRONI氣缸

訪問次數：1448

所屬分類：其它品牌

更新時間：2018-05-28

廠商性質：代理商

聯系我們留言詢價

詳情介紹

CAPRONI Gear Pumps齒輪泵

Group 00

Displacement: 0.25...2 cm³
Outlet pressure: up 200 bar
Speed: 750 …3500 rev/min
Fluid temperature: -20 … +80 °C
Working liquid: hydraulic oils
Viscosity: 16 … 200 mm²/s
Degree of filtration: 15-25µm

Group 10

Displacement: 1...9.8 cm³
Outlet pressure: 250 bar
Speed: 650 …3500 rev/min
Fluid temperature: -20 … +80 °C
Working liquid: hydraulic oils
Viscosity: 20 … 200 mm²/s
Degree of filtration: 25µm

Group 20

Displacement: 4.5...36 cm³
Outlet pressure: 250 bar
Speed: 650 …3500 rev/min
Fluid temperature: -20 … +80 °C
Working liquid: hydraulic oils
Viscosity: 20 … 200 mm²/s
Degree of filtration: 25µm

Group 30

Displacement: 20...60 cm³
Outlet pressure: 250 bar
Speed: 650 …2500 rev/min
Fluid temperature: -20 … +80 °C
Working liquid: hydraulic oils
Viscosity: 20 … 200 mm²/s
Degree of filtration: 25µm

Pumps with Valves

The technical characteristics are in compliance with the pumps of 10, 20 and 30 groups.
For more details, please see the catalogue.

Tandem Pumps

The technical characteristics are determined by the compound gear pumps.
For more details, please see the catalogue.

CAPRONI Control Valves 控制閥

Sectional Control Valves

Rated flow: 80 l/min
Rated pressure: 250 bars
Max. back pressure: 18 bars
Nominal port size: 12 mm
Fluid temperature: -20 … +80 °C
Working liquid: hydraulic oils
Viscosity: 15 … 300 mm²/s

Directional Control Valves

Max. pressure:
Port P,A and B: 320 bars
Port T: 160 bars
Max flow:
NG06 - 80 l/min
NG10 - 140 l/min
Fluid temperature: -20 … +80 °C
Working liquid: hydraulic oils
Viscosity: 10 … 800 mm²/s

CAPRONI Valves閥門

Valves - for modular , pipe and plate mounting

Available:
Relief, Relief-Prefill, Unloading Relief, Pressure Reduction, Check, Flow Control, Dividing and Combining Valves
Nominal bore: 6 , 10 mm
Pressure control range: 5 … 100 bar
15 ... 200 bar
20 … 320 bar
Rated flow: 10 ... 160 l/min
Working temperature: -20 … +70 °C
Working liquid: hydraulic oils
Viscosity: 10 to 200 mm²/s
Degree of filtration: 25µm

Cartidge Valves

Available:
Solenoid, Relief, Sequence, Needle, Manual, Pressure reduction Valves Operating pressure: 250 bars
Internal leakage: 0.22 cc/min at 250 bars
Fluid temperature: -20 … +90 °C
Working liquid: hydraulic oils
Viscosity: 10 … 800 mm²/s
Degree of filtration: 25µm

CAPRONI Hydraulic systems液壓裝置

Mini Power Packs MPP

El. Motors:
AC 0.55...3 kW , mono or three-phase
DC 0.8... 3 kW ; 12 or 24 V
Tank volume: 1...60 l
Pump displacement: 1...6,1 cm³
Wide range of modular elements allowing the implmentation of additional hydraulic schemes.

Mini power packs HC

El. Motors:
DC 1... 3 kW ; 12 or 24 V
Tank volume: 2...15 l
Pump displacement: 1...6,1 cm3
Working pressure: up to 250 bar
Assembled with different valves depending on the hydraulic scheme.

Hydraulic station

El.motors
AC - to 25 kw.; 1-3 pieces
Mounting - vertical, horizontal, moved out;
Capacity of the tank - to 500 L.;
Displacement of the pump: 1-55 cm³
They are produced with a large variety of elements - accumulators,coolers and others for the realization of each concrete hydraulic sheme.

Motor-pump

DC motor from all dimensions, coupled with gear pump - group 10 or group 20.
Different modifications and variants for implementation of various decisions.
More information You can find in our catalogue.

CAPRONI Hydraulic motors液壓馬達

Hydraulic motor MGL

Displacement [cm3/rev.]         50 ÷ 315
Maximum pressure [bar]        140
Maximum oil flow [lpm]           25 ÷ 60
Maximum speed [RPM]          600
Maximum torque [daNm]        7.4 ÷ 30.5
Minimum speed [RPM]           10
Temperature range [°C]         -30 ÷ 90
Viscosity range [mm2/s]         20 ÷ 75

Hydraulic motor MHL

Displacement [cm3/rev.] 50 ÷ 400
Maximum pressure [bar] 175
Maximum oil flow [lpm] 60
Maximum speed [RPM] 1200
Maximum torque [daNm] 9.4 ÷ 50
Temperature range [°C] -30 ÷ 90
Viscosity range [mm2/s] 20 ÷ 75